HPE Networking Comware Switch 24G 4SFP+ EI 5140

SKU

JL828A

Skip to the end of the images gallery

Skip to the beginning of the images gallery

In stock

Networking Comware Switch 24G 4SFP+ EI 5140

Category: Network Switches

More Information

More Information
Power over ethernet	No
Stackable	Yes
Ports type	Gigabit Ethernet (10/100/1000)
Ports quantity	24
SKU	JL828A
EAN	0190017500447
Manufacturer	HPE
Availability	Y

Reviews

Nickname

Summary

Review

Reasons To Buy

Scalability and High Availability

The HPE Networking Comware Switch Series 5140 EI delivers scalability and enhances reliability of the network with HPE Intelligent Resilient Framework (IRF) technology. IRF stacking enables virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router.
HPE IRF stacking enhances performance and reliability with uninterrupted L2 switching and L3 forwarding and reduces operational complexity with simpler, flatter, and more agile networks.
Four fixed uplinks (SFP, SFP+, and 10GBASE-T) deliver performance for bandwidth intensive applications.
Link redundancy with support for protocols such as Spanning Tree/MSTP, RSTP, and Smart link provides high availability.

Comprehensive Security Control

The HPE Networking Comware Switch Series 5140 EI supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control.
ACLs provide IP Layer 2 to Layer 4 traffic filtering while supporting global ACL, VLAN ACL, port ACL, and IPv6 ACL.
Dynamic ARP protection with functions such as ARP Detection and ARP packet validation that block broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data.
Centralized security policy management and network protection with HPE Aruba Networking IMC End User Admission Domination (EAD) which integrates security policies, network access control, and access right control policies to form a cooperative security system.
Enhance security with encryption of access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, and RADIUS/HWTACAS.

Simplified Management

The HPE Networking Comware Switch Series 5140 EI can be seamlessly managed with HPE Aruba Networking IMC to provide end-to-end network transparency with a consistent network experience through comprehensive configuration, compliance, and policy management.
It supports SmartMC, an embedded network management tool with a web-based GUI to simplify operations and facilitate centralized management. It offers features such as configuration backup, software version management and seamless switch replacement.
RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events.

Enhanced Quality of Service

The HPE Networking Comware Switch Series 5140 EI supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch.
It provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.
Reduce unwanted network traffic with broadcast control and limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.

Description

The HPE Networking Comware Switch Series 5140 EI delivers scalability, high availability, and low TCO at the access layer of medium and large enterprise campus networks. The series offers enterprise-class QoS and security, HPE Intelligent Resilient Fabric (IRF) stacking, static layer 3 routing and RIP; convenient fixed 10 GbE uplink ports, PoE+, ACLs, and IPv6; and delivers energy savings with Energy Efficient Ethernet. The HPE Networking Comware Switch Series 5140 EI also includes Smart Management Center (SmartMC), an embedded network management tool that can be leveraged at no additional cost by small and medium networks for centralized management and operations. The series can also be managed with HPE Aruba Networking IMC for a single view of your entire network.

What is new supporting point:
It includes energy-saving green design features such as automatic switching of idle ports to energy-saving mode and powering down unused ports.
Gigabit Ethernet access switch with static layer 3 routing, RIP, high density 10 GbE uplinks, and POE+ models for voice, video, and wireless.
It includes embedded network management capabilities with Smart Management Center (SmartMC).
It supports IRF technology that enables plug-and-play device aggregation and link aggregation across multiple devices, enhancing network redundancy and resource utilization.

Specifications

Ports & interfaces
I/O ports	24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1–24 support 10BASE-T/ 100BASE-TX, 1000BASE-T (full only) SFP+ fixed 1000/10000 SFP+ ports 1 RJ-45 serial console port
Data transmission
Throughput	95 Mpps
Switching capacity	128 Gbit/s
Design
Stackable	Yes
Performance
Physical stacking (units)	9
Internal memory	512 MB
Flash memory	256 MB
Stackable	Yes
Power
AC input voltage	100 - 240 V
Power consumption note	24W (Maximum), 19W (Idle) Note: Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget	370 W
Power over Ethernet (PoE)	Yes
Other features
Latency	1000 Mb latency: < 5 µs 10 Gbps latency: < 3 µs
Performance management	HPE Aruba Networking IMC - Intelligent Management Center; SmartMC; Command-line interface; Web browser; SNMP manager
Memory and processor	512 MB SDRAM, 256 MB flash
Weight (imperial)	2.5 kg (5.51 lbs)
I/O ports	24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1–24 support 10BASE-T/ 100BASE-TX, 1000BASE-T (full only) SFP+ fixed 1000/10000 SFP+ ports 1 RJ-45 serial console port
Dimensions (W x D x H) (imperial)	43.7 x 439.9 x 160 mm (1.72 x 17.3 x 6.3")
Operational conditions
Operating temperature (T-T)	-5 - 45 °C
Heat dissipation	88 BTU/h
Weight & dimensions
Width	43.6 mm
Depth	440 mm
Height	160 mm
Weight	2.5 kg
Weight (imperial)	2.5 kg (5.51 lbs)
Dimensions (W x D x H) (imperial)	43.7 x 439.9 x 160 mm (1.72 x 17.3 x 6.3")
Technical details
Physical stacking (units)	9
Stackable	Yes
Memory
Internal memory	512 MB
Flash memory	256 MB

You may also be interested in

Compare Products
Product	New HPE Networking Comware Switch 24G 4SFP... Login for pricing	Recommended Cisco Catalyst WS-C2960X-48FPS-L Manag... Login for pricing	Allied Telesis AT-IE510-28GSX-80 Manag... Login for pricing	Bestseller NETGEAR M4300-52G-PoE+ 550W PSU Manage... Login for pricing	Hot Product Cisco Meraki MS225-48LP L2 Stck Cld-Mn... Login for pricing	Popular Cisco Meraki MS225-48FP L2 Stck Cld-Mn... Login for pricing
SKU	JL828A	WS-C2960X48FPSL-RF	AT-IE510-28GSX-80	GSM4352PA-100NES	MS225-48LP-HW	MS225-48FP-HW
Manufacturer	HPE	Cisco	Allied Telesis	Netgear	Cisco	Cisco
Rack mounting	N/A	Y	Y	Y	Y	Y
Power over Ethernet (PoE)	Y	Y	N	Y	Y	Y
Stackable	Y	Y	Y	Y	Y	Y
Switch type	N/A	Managed	Managed	Managed	Managed	Managed
Basic switching RJ-45 Ethernet ports quantity	N/A	46 to 48	24	46 to 48	46 to 48	46 to 48
Basic switching RJ-45 Ethernet ports type	N/A	Gigabit Ethernet (10/100/1000)	Gigabit Ethernet (10/100/1000)	Gigabit Ethernet (10/100/1000)	Gigabit Ethernet (10/100/1000)	Gigabit Ethernet (10/100/1000)