APC SRVPM10KRI uninterruptible power supply (UPS) Double-conversion (Online) 10 kVA 10000 W

SKU
SRVPM10KRI
Login for pricing
Out of stock
10 kVA, 10 kW, 220-240, 40/70Hz, 58 dB
Automatic internal bypass

Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

ECO Mode

Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

EPO

Attach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation.

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.

Management Software

Double conversion on-line topology

Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.

Management Software

Allows you to easily monitor your utility power and manage your UPS.

Pure sine wave output on battery

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Intuitive LCD interface

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

ECO Mode

Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

High efficiency

High efficiency rates that remain stable even at lower operating power levels

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Intelligent Card Slot

Customize UPS capabilities with management cards.

LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.

LED Indicators

Provide easy-to-read status of the unit and utility power conditions.

Network manageable

Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

Serial connectivity

Provides management of the UPS via a serial port.

Predictive failure notification.

Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Intelligent Card Slot

Customize UPS capabilities with management cards.

LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.

Serial connectivity

Provides management of the UPS via a serial port.

USB connectivity

Provides management of the UPS via a USB port (not available on all models).
SKU SRVPM10KRI
EAN 0731304343417
Specification
Power
Output power10000 W
Input operation voltage (min)110 V
Input operation voltage (max)300 V
Output operation voltage (min)220 V
Output operation voltage (max)240 V
Surge energy rating600 J
Emergency Power Off (EPO)Yes
Crest factor3:1
Output power capacity10 kVA
ECO modeYes
Performance
Audible alarm modesAlarm when on battery, Overload alarm, Low battery alarm
UPS topologyDouble-conversion (Online)
WaveformSine
Auto-restartYes
LED indicatorsYes
Noise level58 dB
Audible alarm(s)Yes
Features
Audible alarm modesAlarm when on battery, Overload alarm, Low battery alarm
UPS topologyDouble-conversion (Online)
WaveformSine
Auto-restartYes
Output power10000 W
Input operation voltage (min)110 V
Input operation voltage (max)300 V
Output operation voltage (min)220 V
Output operation voltage (max)240 V
Surge energy rating600 J
Emergency Power Off (EPO)Yes
Noise level58 dB
Crest factor3:1
Audible alarm(s)Yes
Output power capacity10 kVA
ECO modeYes
Input frequency40/70 Hz
Ports & interfaces
USB portYes
Serial interfaceYes
SmartSlotYes
Battery
Battery voltage192 V
Automatic battery testYes
Design
LED indicatorsYes
Product colourBlack
CertificationCE, EAC, EN/IEC 62040-1, EN/IEC 62040-2
Display typeLCD
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95%
Storage relative humidity (H-H)0 - 95%
Operating altitude0 - 3000 m
Non-operating altitude0 - 15000 m
Weight & dimensions
Package width600 mm
Package depth760 mm
Package height240 mm
Weight16 kg
Width438 mm
Package weight20 kg
Height86.5 mm
Depth615 mm
Packaging data
Cables includedUSB cable
ManualYes
Package width600 mm
Package depth760 mm
Package height240 mm
Package weight20 kg
Certificates
CertificationCE, EAC, EN/IEC 62040-1, EN/IEC 62040-2
Packaging content
Cables includedUSB cable
ManualYes
Manufacturer APC
In Stock N